中文版 EN

Home>Product Center

G-Cut

Release time:[2017-9-2 9:40:15]    Browser:3278second

LAG's products represent a synthesis between the Italian technology innovation, attention to detail and design and the great Chinese production capacity. These values added with the best components in the world allow LAG to offer its customers the Press Brake with the best relationshio between quality and price on the market.

 

Constant, precisione and straightness of the cut

Ø  Monolithic structure

Ø  Innovative hydraulic system

Ø  Thrust of cylinders perfectly aligned with the blade carrier beam

Ø  Hold down units with proportional pressure self adjuste

Ø  Blade carries beam guides along the entire cutting length

Ø  Ball screw back gauge

Ø  Squaring front support arm complete with disappearing gauge, rules and balls

Ø  U" profile ball bench for sheet handling, balls and front support

Ø  front support with balls

Ø  blades with two cutting edges (with four on request)

Ø  LED lighting cutting line

Ø  CNC control mod. ESA 525 or DAC 310

Ø  Automatic setting, according to the material and its thickness, of:

      * Blade gap (optional);

      ‘Rake angle;

      * Cutting length.

Ø  Anti twist device (optional)

 

 

Monolithic structure

The sturdy monolithic structure made by thick, high-strength sheets of steel designed allows to obtain the maximum rigidity and geometric stability to ensure the highest cutting precision.

The ergonomic design facilitates the operator and the maintenance of the machinery.

 

 

Blade carrier beam

Ø  Thrust of cylinders perfectly aligned with the blade carrier beam

Ø  Allows a longer lifetime of the cylinders and seals

Ø  Ability to trim the sheet metal up to half the thickness of the sheet itself

 


Manual device to adjust the blade gap

Permit to adjust quickly the blade gap to the thickness of the material you wish to cut.

The blade gap adjustment is mtorized from shear models from 10 mm up.

 

 

Blade gap adjustment

The Blade gap adjustment, is a very simple procedure, which consists in rotating the relevant handwheel with indicator that displays the thickness of the sheet chosen in tenths of a millimeter.

 

The blade gap can be motorized on request, while it is supplied as standard of larger shears; in this case the handwheel is replaced by two+/- buttons and again there is an indicator for the thickness; finally the blade gap can also be controlled as an auxiliary function on a CNC control when requested.

 


Blade carriers beam guides along the entire cutting length

it slides on guides of self-lubricating material and on pads

that are designed to vary the gap between the blades.

 


Hold down unites

Hold down unites with proportional pressure self adjuste. Automatically variable in function of the thickness and the strength of

the material

 

Blades with two cutting edges (with four on repuest)

 


LED lighting cutting line

The machine in the cutting

easy to locate as the frontal

area is equipped with a light beam that projects a slight shadow to the cutting edge, thus making it protection is provided with a transparent plastic screen

 


 Uprofile ball bench for sheet handlingballs and front support

The bench is supplied in "U" shaped profiles complete with balls to facilitate material handling on top of the bench itself.

It has also a loophole for the positioning and fixing of the squaring arm and front support arms.

 


Spuaring front support arm

The squaring front support arm is complete with:

*disappearing gauge

*rules

*Balls

(as optional the arm and bench can be supplied with anti creep brushes)

 


Ball screw back gauge

The back gauge is mounted to the fixed part of the machine;

consequently it is not subject to stress caused by the movement of the blade carrier.

 

The back gauge movement tilts and follows the descent of the blade moving away from the sheet during cutting, to avoid those loads which could modify its position and in the long term damage it.

 


Innovative hydraulic system

The hydraulic system consists of hydraulic components of the highest European quality. It facilitates the operator in all the adjustments and settings required for the best quality of cut according to the size in thickness, length, width and types of material to be cut. The hydraulic system by self-regulation of the pressure reduces stress on the various components ensuring greater longevity to the shear.

 


CNC control model ESA 525 or DAC 310

CNC control model ESA 525 or DAC 310 for automatic setting, depending on the material and thickness to be cut, of

*Blade gap,

*Rake angle,

*Cutting length.



Copyright 2017 . All rights reserved. LAG Machine Tool (shandong) Co.,ltd